·USB Type-C Downstream Facing Port(DFP)
·Type-C supports PPS, PD3.1, PD2.0, QC4.0+/QC4/QC3.0/QC2.0,SCP,FCP, Super charging-V, AFC,PE, Apple2.4A,BC1.2
·Type-A supports BC1.2, Apple2.4A,QC2.0/QC3.0, SCP,FCP, AFC, Super charging-V
·Intelligent power distribution
·Integrated VCONN power and switch for e-Marker cable detection
·Built-in A&C Independent feedback loop
·Built-in MCU and flash controller
·Programmable cable compensation
·Built-in discharge MOS
·Built-in Type-C N-MOS load switch driver
·Power saving in standby mode
·PDO selection by external resistor
·External thermal protection with NTC
·Protection: OVP/UVP/OCP/OTP etc.
·Package: QFN-24, 4mm×4mm
The IM2413 is a highly integrated USB A+C quick-charge controller that supports PD3.1 /PPS/QC4.0+/QC4/QC3.0/QC2.0 and other fast charging protocol. It is design for USB DFP (Source) charging applications such as power adapters, car chargers and etc. The IM2413 built-in high-precision DACs and shunt regulators to provide high-precision output for type-C and type-A. It minimizes external components and saves BOM cost by integrating BMC PHY, Type-C detection, voltage and current monitors, output bleeding circuit, load-switch NMOS gate driver and system ESD design. When 1A1C connector plug into simultaneously, Type-C or Type-A can keep their own fast charging and power distribution is also realized. The IM2413 also provides comprehensive protections such as over voltage protection (OVP), under voltage protection (UVP), over temperature protection (OTP), over current protection (OCP) etc. The IM2413 is available in QFN24 package.
在线订购 
电源管理芯片
电机驱动芯片
接口控制芯片
音频功放
消费电子