·USB Type-C Downstream Facing Port(DFP)
·Support PD2.0,PD3.0(TID:8915),PPS
·Support BC1.2 DCP, QC2.0/QC3.0/QC4.0/QC4.0+, Apple2.4A
·Support UFCS(0302347161323R0M-UFCS00055)
·Support SCP,FCP,AFC,Supper Charging-V
·Built-in shunt regulator for constant voltage and constant current control
·Built-in OTP controller
·Cable compensation
·Built-in discharge MOS
·Driver for NMOS load switch
·Integrated VCONN power and switch for e-Marker cable detection
·Power delivery up to 100W
·Power saving mode in standby mode
·PDO selection by external resistor
·External thermal protection with NTC
·Support I2C
·CC1/CC2/DP/DM over voltage protection
·Protection: OVP/UVP/OCP/OTP etc.
·Package: QFN-16, 4mm×4mm
The IM2405A is a highly integrated USB PD controller that supports PD3.0 Programmable Power Supply specification and Qualcomm® Quick Charge™ 4 or Quick Charge 4+ technologies. It is design for USB DFP (Source) charging applications such as power adapters, car chargers and etc. The IM2405A built-in two high-precision DACs and shunt regulators to provide high-precision VBUS output and CV/CC control. It minimizes external components and saves BOM cost by integrating BMC PHY, Type-C detection, voltage and current monitors, output bleeding circuit, load-switch NMOS gate driver and system ESD design. The IM2405A also provides comprehensive protections such as over voltage protection (OVP), under voltage protection (UVP), over temperature protection (OTP), over current protection (OCP) etc. The IM2405A is available in QFN16 package.
在线订购 
电源管理芯片
电机驱动芯片
接口控制芯片
音频功放
消费电子