·Supports USB DCP Shorting D+ Line to D– Line per USB Battery Charging Specification, Revision 1.2 (BC1.2)
·Supports Shorted Mode (Shorting D+ Line to D-Line) per Chinese Telecommunication Industry Standard YD/T 1591-2009
·Supports USB DCP Applying 2.7V on D+ Line and 2V on D- line
·Supports USB DCP Applying 1.2V on D+ and D– Lines
·Automatically Switch D+ and D- Lines Connections for an Attached Device
·Single USB Port Controller (TMI9130B)
·Dual USB Port Controller (TMI9130A)
·Operating Range: 4.5V to 5.5V
·Available in SOT23-6 Package
The TMI9130A and TMI9130B devices are USB dedicated charging port (DCP) controllers. An autodetect feature monitors USB data line voltage, and automatically provides the correct electrical signatures on the data lines to charge compliant devices among the following dedicated charging schemes:
1. Divider 2 DCP, required to apply 2.7V and 2V on the D+ and D– Lines respectively
2. BC1.2 DCP, required to short the D+ Line to the D– Line
3. Chinese Telecom Standard YD/T 1591-2009 Shorted Mode, required to short the D+ Line to the D– Line
4. 1.2V on both D+ and D– Lines
在线订购 
电源管理芯片
电机驱动芯片
接口控制芯片
音频功放
消费电子