·Supports USB DCP Shorting D+ Line to D– Line per USB Battery Charging Specification, Revision 1.2 (BC1.2)
·Supports Shorted Mode (Shorting D+ Line to D-Line) per Chinese Telecommunication Industry Standard YD/T 1591-2009
·Supports USB DCP Applying 1.2V on D+ and D– Lines
·Automatically Switch D+ and D- Lines Connections for an Attached Device
·Single USB Port Controller
·Operating Range: 4.5V to 5.5V
·Available in SOT23-5 Package
The TMI9130F devices are USB dedicated charging port (DCP) controllers. An auto-detect feature monitors USB data line voltage, and automatically provides the correct electrical signatures on the data lines to charge compliant devices among the following dedicated charging schemes:
1. Divider 3 DCP, required to apply 2.7V and 2.0V on the D+ and D- Lines respectively;
2. BC1.2 DCP, required to short the D+ Line to the D– Line
3. Chinese Telecom Standard YD/T 1591-2009 Shorted Mode, required to short the D+ Line to the D– Line
4. 1.2V on both D+ and D– Lines
在线订购 
电源管理芯片
电机驱动芯片
接口控制芯片
音频功放
消费电子